Half-size Egg Crate Vertical Stand – PETG Modules

Stand your matching Half-size egg crate hide upright with these side-linking PETG modules. The hide lowers into the stand slots and lifts straight out again, so you can remove it without undoing a fixing.

This stand fits the matching Half-size egg crate hide measuring 57 × 111 × 20 mm. It is a stand-only accessory: the hide and horizontal stackers are separate products and are not included. If you want to stack matching hides instead of standing one upright, compare the Half-size horizontal stackers.

Choose your module pack

Two modules join side by side to make one stand pair. The Amount option counts individual modules, so a two-module pack provides one pair; larger packs provide additional pairs for multiple matching hides.

• Amount 2: 2 modules, making one pair; pack weight 40 g.
• Amount 4: 4 modules, making two pairs; pack weight 80 g.
• Amount 8: 8 modules, making four pairs; pack weight 160 g.

Black is the standard colour, with other colours available on request.

Fit the hide and lift it out

Join the modules side by side, then lower the matching hide into their slots. The raised sides of each slot limit sideways movement across the hide’s thickness. The hide is not locked or screwed into the stand, so you can lift it straight out; it is a removable upright arrangement.

Two linked modules measure approximately 61.75 mm wide × 61 mm deep × 26 mm high, including the connector that sticks out at the end. These measurements describe the stand alone, not the overall height with the hide fitted.

Rinse or clean with water and avoid contaminants.