A jumping spider enclosure can have a recognisable theme while still leaving room for everyday care. Start with the features you want to add—a hide, a small wall ledge or a climbing detail—then choose a scene that brings them together. A graveyard of tombstones feels different from a ghost ship, but access, space and mounting still decide which pieces belong in your enclosure.

You do not need to fill every wall. A few deliberately placed pieces let you enjoy the design while keeping doors, ventilation and the areas you need to reach clear.

Choose a mix of features, not just a theme

Ledges add small projecting platforms without putting another ornament on the floor. The Round RIP and Gothic Cross tombstone ledges, for example, combine a grassy mound plate with different graveyard motifs. Choose the motif you like, then consider how far the platform projects into the enclosure and what will sit around it.

A hide brings an enclosed feature into the scene. The Witch Hat Hide has a front entrance above its buckle, while the Coffin version of the Ghost Ship Hide has entrances through a stern cabin door and deck hatch. These details affect the available openings and interior, as well as the appearance. Overall size alone does not tell you the entrance size or usable space inside.

Ladders and bridges change the shape of the arrangement. The Ghost Ship rope ladder sits upright against a wall, leaving the space between walls open. Its rope bridge instead spans between the enclosure walls. That is a meaningful layout choice: one carries the theme vertically, while the other introduces a feature across the interior. Neither arrangement guarantees that a spider will follow a particular route or use a chosen hide.

Once you have chosen the types of pieces, the guide to planning hides, ledges and climbing routes develops those choices into a layout.

Let the enclosure shape narrow the options

The Coffin and 12 × 12 × 20 box versions are not simply interchangeable sizes. The Ghost Ship Hide’s Coffin version has the cabin-and-hatch arrangement, while the larger box version includes web rigging behind the sails. Choose the version for its stated enclosure format and read those details alongside its outer dimensions. Some separately sold accessories serve both formats; that does not make every piece interchangeable.

Wall-spanning pieces need particular attention because their position depends on the distance and shape between the walls. The Coffin Ghost Ship bridge wedges where the shaped enclosure provides the matching spacing; the box bridge uses a different wall-to-wall fit. A piece intended to wedge across an enclosure is a different proposition from a magnetic wall ledge.

Keep mounting and access in the picture

Relevant magnetic pieces sit inside the acrylic with their partner magnets outside; magnets for both sides are included. Leave room for the outside fittings as well as the decoration itself. The guide to fitting magnetic spider decor takes you through the mounting and access considerations in more detail.

Before arranging the scene, picture opening the door, reaching a feeding area and removing a piece for cleaning. UK breeder guidance notes that jumping spiders may build retreats near the enclosure top, so think about which surfaces move when you open it. Keep ventilation paths clear and retain open space between features rather than crowding the interior. The aim is a workable enclosure, not a prescribed number of decorations.

One addition, a complete wall or a coordinated set?

An individual piece makes sense when your existing layout has room for a particular addition: perhaps a hide rather than another platform, or an upright ladder rather than a bridge. A ledge pair provides two named ledges to position separately. A complete wall supplies both wall panels, including the shelf or ledge incorporated into that wall design; it does not include all the separate furnishings of a complete set.

The Catacombs Complete Set shows how those choices come together. It contains a lower wall panel, an upper wall panel with a ledge, one Catacombs hide, a skull ledge, a bones ledge and one across-enclosure bone ladder. The Coffin option has the small hide and 70 mm ladder; the 12 × 12 × 20 box option has the large hide and 115 mm ladder. Choose it when you want both the themed wall and that mix of furnishings.

The Tombstone Ledges Set takes a narrower approach, bringing three different ledges together for a consistent graveyard scene. Compare the features you want to arrange rather than the piece count alone. Browse jumping spider decor, complete walls and coordinated sets with those differences in mind.

Plan for care after the scene is built

The spider designs are made from PLA. Follow the care instructions for the actual piece and keep food residue accessible for removal; a material label is not permission to use heat or a particular cleaning chemical. Positioning a hide where you can inspect and remove it is more practical than surrounding it with decorations that must all come out first.

Decor is one part of the setup. Ventilation, moisture and the wider enclosure conditions still need to suit the species you keep. Our enclosure ventilation guide explains how clear openings, furnishings and moisture fit into that plan. Build the scene around those needs, leaving yourself room to observe the enclosure and adjust individual pieces as necessary. For help with the next stage of your layout, explore our jumping spider enclosure and decor guides.