Happy Halloween Jumping Spider Complete Wall

Make a Halloween greeting the backdrop to your jumping spider enclosure. The Happy Halloween Complete Wall brings the lower HALLOWEEN panel and upper HAPPY panel together, with a ledge built into the upper section. Black, white and red details run across the design, with orange in the lower panel.

One purchase contains both wall panels for your chosen enclosure, rather than the entire themed accessory range. Choose the Coffin version for a Coffin enclosure or the 12 × 12 × 20 box version for that box format: the panels and built-in ledge have different dimensions to suit the two layouts.

The wall sits inside against the back acrylic, giving you a clear backdrop to arrange other pieces around. The lower panel's foot goes under the substrate, and the upper panel sits on top of it. Magnets in the panels pair with the supplied magnets outside the acrylic. For help positioning other accessories around the built-in ledge, see our guide to planning the enclosure layout.

Choose your wall size

• Coffin: lower panel 82.5 × 120 × 14 mm; upper panel 81.6 × 59.3 × 20 mm. The built-in ledge is 34 mm wide and projects 20 mm, with its top at 160 mm. Both panels go through the Coffin door and turn flat inside.
• 12 × 12 × 20 box: lower panel 110 × 100 × 16 mm; upper panel 110 × 80.8 × 22 mm. The built-in ledge is 44 mm wide and projects 22 mm, with its top at 161 mm.

Panel dimensions are the manufacturer's width × height × depth. Both versions are PLA printed, with two 10 × 2 mm magnets in each panel and matching outside magnets included. The colours form part of the design.

If you would like separate pumpkin and ghost shelves elsewhere in the scene, add the Happy Halloween Ledge Pair, sold separately from this two-panel wall.