Pumpkin Patch Jumping Spider Complete Wall

Give your jumping spider enclosure a Pumpkin Patch backdrop, with orange pumpkins and green details across a black PLA wall. The upper panel includes a half-pumpkin shelf, bringing a ledge into the scene while leaving you free to choose and arrange the other accessories.

One purchase contains both wall panels: the lower panel and the upper panel with its integrated pumpkin ledge. Choose Coffin for the shaped coffin enclosure or 12 × 12 × 20 box for a 120 × 120 × 200 mm box enclosure. These options use different wall dimensions; they are not interchangeable versions of one universal wall.

This is the backdrop-only choice, rather than the full themed accessory range. Add the separately sold Pumpkin Patch Ledge Pair if you want a pumpkin shelf and leaf shelf to position elsewhere. If you want the wall, hide, both separate ledges, two vines and ground pumpkins together, the Pumpkin Patch Complete Set includes all eight pieces.

Fit the lower panel against the inside back wall with its foot beneath the substrate, then place the upper panel above it. Both panels use magnets inside the enclosure with partner magnets outside the acrylic; magnets for both sides are included. The coffin panels go through the coffin door and turn flat inside. When arranging other pieces, leave room around the integrated shelf rather than treating the backdrop as a flat surface; our guide to planning walls and climbing routes helps you consider the layout as a whole.

Manufacturer design dimensions, width × height × depth:

• Coffin: lower panel 82.5 × 120 × 14 mm; upper panel 81.6 × 59.3 × 21.3 mm. The integrated shelf projects 20 mm, with its top at 160 mm.
• 12 × 12 × 20 box: lower panel 110 × 100 × 16 mm; upper panel 110 × 80.8 × 23.1 mm. The integrated shelf is 44 mm wide and projects 22 mm, with its top at 161 mm.