Threaded Bone Ladder Kit

Create an angled bone-ladder feature in your jumping spider enclosure with this threaded kit. Separate rungs and rail bones are strung together, giving you a skeletal design that hangs between magnetic end plates rather than sitting flat against a wall. For a coordinated scene with different ladder designs, compare the Catacombs Accessory Set with this standalone assembly kit.

The kit contains two end plates, eight rungs and 20 rail bones, plus the threading material needed for assembly. The parts thread onto two cords or 1 mm wire; the supplied threading material provides what you need to put the ladder together. With all eight rungs assembled, the ladder is approximately 246 mm long.

Each end plate has a 10 × 2 mm magnet, and the outside partner magnets are included. The magnetic ends let the ladder hang at an angle. It is intended for either the Coffin enclosure or the 12 × 12 × 20 box, with placement depending on your layout and the assembled length. If you prefer a ready-formed design without threading, the upright Catacombs wall ladder sits against the inside wall of the Coffin enclosure.

The PLA parts comprise 18 × 35 mm end plates, 31 mm-long rungs and 15 mm-long rail bones. To explore other ladder and scene-building choices for your layout, browse the Jumping Spider Accessories collection.