Ghost Ship Accessory Set for Coffin Enclosures

Turn your jumping spider's coffin enclosure into a miniature ghost ship scene. A crossbones backdrop, ship-shaped hide and matching ledges bring the nautical theme together, while a rope ladder, bridge, wheel and anchor let you extend the scene across the enclosure. If you are still choosing a theme, explore other coordinated scenes in Jumping Spider Accessories.

This nine-piece PLA set includes two crossbones wall panels, a ship hide, a plank ledge, a crow's nest ledge, a 118 mm rope ladder, a rope bridge, a ship's wheel and an anchor. The upper wall panel has an additional built-in plank ledge. The hollow ship hide has two entrances: a stern cabin door and a deck hatch.

Fit the lower backdrop panel against the back wall with its foot under the substrate, then place the upper panel above it. The wall panels and separate magnetic accessories fit inside, with their partner magnets outside the acrylic. Magnets for both sides are included wherever used.

The rope bridge wedges between the coffin's side walls where their spacing matches, around 60 or 92 mm above the base, and uses no magnets. Every piece is designed to pass through the 49.8 × 127 mm coffin door; the wall panels turn flat inside.

For a 120 × 120 × 200 mm box with 114 mm internal width, compare the seven-piece Ghost Ship box-enclosure set. It leaves out the backdrop panels and uses a larger hide and a bridge sized for that box, with different attachment arrangements.